Daytapes

Guides · Interviews

How to record interviews for articles, podcasts and research

Set up two mics, back up your audio, get consent and a release, and turn the recording into a transcript you can quote from.

By Daytapes · Updated · Research-based

We may earn a commission if you buy through links on this page. It never changes what we recommend. How this works

A good interview recording has three parts: a quiet room, one clean mic close to each voice, and a backup. Open by stating names, date and consent on tape, ask open questions, and copy the files to two places before you leave. Check every quote against the audio before you publish.

Whether you are writing an article, making a podcast or collecting research data, the recording is your source. If the audio is bad or lost, you cannot go back and fix it. This guide covers setup, backup, consent and releases, and what to do with the transcript.

The examples use made-up people: Maya, a freelance writer, interviewing Theo, a baker, for a local feature.

Before the interview

Agree on the plan

Tell the person what the piece is, where it will appear, how long you need and that you will record. Send two or three topics, not every question. If you plan to quote them, say whether quotes will be checked with them first.

Pick the place

Quiet beats pretty. Choose a room with soft surfaces: a living room with a rug, not a café, not a tiled kitchen. Turn off fans, the fridge nearby and notifications. Ask to close windows.

If you must meet somewhere noisy, put the mics closer and record a bit of "room tone," 30 seconds of silence, for editing later.

Recording rules differ by state, and interviews for publication add their own questions. This is not legal advice. Read our consent guide and the Reporters Committee's recording guide, which states that the federal government and every state except Vermont has at least one law restricting eavesdropping on or recording private conversations (as of the guide's pages, checked November 14, 2026). Ask permission, on the recording.

Two-mic setups that work

Option A: one recorder in the middle

A handheld recorder on a stand or folded towel between two people works for a casual interview. Place it about 8 to 12 inches from each person, equally close.

  • Zoom H1essential. Zoom lists a built-in 90-degree XY stereo pair, 32-bit float recording, a mic and line input, USB-C, microSD cards up to 1 TB and about 10 hours on two AAA batteries (alkaline estimate), as of November 14, 2026. Zoom says 32-bit float means "no need to set gain." Zoom H1essential. Downsides: one stereo pair hears the whole room, so a noisy room is a problem; both voices are on the same two channels and cannot be fully separated later.

Option B: a mic for each person

Two lapel or wireless mics give each voice its own clean track.

  • RODE Wireless Micro. RODE lists two clip-on transmitters with built-in mics, a receiver that connects to a phone (USB-C or Lightning versions), a charging case and furry windshields, with up to 21 hours of battery including the case. A reviewer notes it has no on-board recording, so the phone is your only recording. RODE Wireless Micro. Downsides: no backup on the transmitter (per that reviewer); both voices go into a single phone recording.
  • DJI Mic 3. DJI advertises dual-file 32-bit float internal recording on the transmitters, meaning a backup is saved on each mic. DJI Mic 3. Downsides: costs more than simpler kits (check current pricing); you move files from each mic afterward.

These are research-based notes from the makers' own pages and a reviewer, not hands-on tests. The best setup is the one you can run without thinking. See our recorder roundup and the handheld recorders guide for more.

Remote interviews

For video or phone interviews, record on the platform and a backup on a local device on your side. If both people record their own end, you can line them up later. Tell your guest to wear headphones so your voice does not leak into their mic.

Back up everything

Plan for failure. In most real disasters, one device fails and another one saves you.

  1. Two recordings at once: a recorder plus your phone, or a recorder plus the platform's recording.
  2. Check levels and storage before you start. Record 20 seconds and listen with headphones.
  3. Check during: glance at the recorder every 10 minutes to confirm it is still going.
  4. Copy right away. Before you leave the room, or the day of, copy the files to your computer and to a cloud folder or second drive.
  5. Never record over, edit or delete the original. Work on a copy.

During the interview

  1. Slate. "It's Saturday, November 14, 2026. This is Maya interviewing Theo at his bakery for the Harbor Street feature. Theo, are you comfortable with me recording this?" Wait for the yes.
  2. Start with easy questions. Let them settle.
  3. Ask open questions. "Tell me about the day you opened" beats "Did you open in 2019?"
  4. Do not talk over them. Say "yes" with your face, not your voice. Overlap ruins audio and transcripts.
  5. Ask for spelling. Have them spell names and places on tape.
  6. Ask the follow-up. The best quote is often the second answer.
  7. Close with two questions. "Is there anything I did not ask?" and "Is there anything you said that you would like to correct or leave out?"
  8. Take a photo of the room and gear if you want a record of the setup.

These get mixed up, and they are different.

The Oral History Association's glossary describes informed consent as an agreement that documents, verbally or in writing, that the person has been given the information they need to decide whether to take part. It can be a signed form or a recorded spoken statement before the interview. A release, by contrast, may involve specific agreements, including assigning copyright to the interviewer or an archive. The OHA's participant guide says informed consent does not deal with copyright. Its 2025 ethics statement also recommends giving the narrator a chance to review the interview before public release.

In practice:

  • Consent: "I agree to be interviewed and recorded for this purpose."
  • Release: "I agree you may publish, broadcast or archive this recording and transcript in these ways."

For a podcast, the release should cover distribution and clips. For research, it should say how data is stored, who sees it and whether the person is named. If you need a formal release or are working with an institution, follow its rules and ask a lawyer or review board. Nothing here is legal advice.

News interviews may follow different conventions, such as on the record, off the record, on background. Agree on terms before the interview and say them on tape.

Transcripts

A transcript makes quotes findable, but it is a draft until you check it.

  • Get audio in. In Daytapes (our own product, invite-only at launch) you can record in the app, upload a file (up to 4 hours), use the "Send to Daytapes" iOS Shortcut from Voice Memos, email audio to your private address, or use a "Daytapes Inbox" folder in Drive, Dropbox or OneDrive. If you already have a transcript from Otter or Whisper (.txt, .srt, .vtt, .json), attach it with the audio. Recording in the web app on iPhone pauses if the screen locks or you leave the app, so for long interviews use a dedicated recorder and upload afterward.
  • Use the page. Each recording becomes a page with a transcript that plays along like lyrics, who is talking by name, a summary and talking points.
  • Fix speaker names so quotes go to the right person.
  • Check every quote against the audio. Click the line and listen. Automatic transcripts miss names, numbers and negatives ("can" vs "can't").
  • Keep the audio. Your source is the recording, not the text.

Quotes, edits and fairness

  • Quote accurately. Trim "um" and false starts only if your standards allow it, and never change the meaning.
  • Put context around a hard quote.
  • Fact-check numbers and dates separately.
  • If the person asks to correct something, discuss it honestly with your editor or review board.
  • Keep recordings private until the person has agreed to how they will be shared. For clips, a Daytapes share link supports hidden parts and a custom preview card.

A checklist

  1. Plan and consent agreed.
  2. Quiet room, gear tested.
  3. One mic per person and a backup.
  4. Slate with consent on tape.
  5. Open questions and spelled names.
  6. Two copies before you leave.
  7. Transcript checked against audio.
  8. Release or permission in writing.

For in-person recordings of meetings rather than interviews, see record meetings in person.

Questions

Do I need two microphones for an interview?

No, but it helps. One mic can work in a quiet room if you sit close. Two mics, one per person, give each voice clean audio and make editing and transcripts easier.

Why record on two devices?

Backups. Recorders fail, cards fill and phones get calls. A second recording, even a rough one, saves the interview.

What is the difference between consent and a release?

The Oral History Association describes informed consent as agreeing to take part, and a release as the agreement about use and rights, such as copyright. They are separate documents.

Can I trust an automatic transcript for quotes?

Use it as a draft. Check every quote against the audio before you publish.

Sources

  1. Oral History Association: Principles and Best Practices glossary (accessed November 14, 2026)
  2. Oral History Association: Statement on Ethics (accessed November 14, 2026)
  3. Reporters Committee for Freedom of the Press: Reporter's Recording Guide (accessed November 14, 2026)
  4. Zoom H1essential product page (accessed November 14, 2026)
  5. DJI Mic 3 product page (accessed November 14, 2026)
  6. RODE Wireless Micro product page (accessed November 14, 2026)